Staple Job

Purpose:

To set stapling as the default for all print jobs. (Select stapling from the printer driver if you want to staple only specific jobs.)

Values:

Off* Does not staple print jobs.

On

Staples each print job sent to the printer.

Staple Prime Src

Purpose:

To specify the paper source you want the printer to use when it primes the stapler. When a staple cartridge is replaced or a staple jam is cleared, the printer may need to prime the stapler by stapling a sheet of paper several times.

Values:

Tray <x> (Tray 1*)

Selects paper from the specified tray.

MP Feeder

Selects paper from the multipurpose feeder.

140

Page 142
Image 142
IBM 1220 manual Staple Job, Staple Prime Src, 140, Tray x Tray Selects paper from the specified tray MP Feeder