IBM 1220 manual Print Area, Print Timeout, Printer Language, 158, Normal Fit to Whole

Print Area

Purpose:

To modify the logical and physical printable area.

Values:

Normal*

Fit to Page

Whole Page

Note: The Whole Page setting only affects pages printed using PCL 5 interpreter. This setting has no effect on pages printed using the PCL XL or PostScript interpreters. If you try to print any data in the non-printable area defined by Normal Print Area, the printer will clip the image at the boundary defined by the Normal defined printable area.

Print Timeout

Purpose:

To specify the amount of time (in seconds) the printer waits before printing the last page of a print job that does not end with a command to print the page. The print timeout counter does not start until Waiting is displayed.

Values:

Disabled	The printer does not print the last page of a print job until one of the following occurs:
	• The printer receives enough information to fill the page.
	• The printer receives a Form Feed command.
	• You select Print Buffer from the Job Menu.
1...255 (90*)	The printer prints the last page after the specified time. (Your printer may not support
	the entire range of values.)

Printer Language

Purpose:

To establish the default printer language used to communicate data from the computer to the printer.

Values:

PCL Emulation PCL emulation, compatible with Hewlett-Packard printers.

PS Emulation* PostScript emulation, compatible with Adobe PostScript language.

Note: Setting a printer language as the default does not prevent a software application from sending print jobs that use the other language.

158