Restore Held
Jobs. Go/Stop?
What this message means:
Someone reset the printer or turned it on, and the printer detects Print and Hold jobs stored on the hard disk.
What you can do:
•Press Go. All Print and Hold jobs on the hard disk are restored to printer memory.
•Press Return or Stop. No Print and Hold jobs are restored to printer memory. The printer returns to the Ready state.
See also:
Holding a job in the printer
Restoring Factory
Defaults
What this message means:
The printer is restoring the factory default printer settings. When factory default settings are restored:
•All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted.
•All menu settings return to the factory default setting except:
–The Display Language setting in the Setup Menu.
–All settings in the Parallel Menu, Serial Menu, Network Menu, Infrared Menu, LocalTalk Menu, USB Menu, and Fax Menu.
What you can do:
Wait for the message to clear.
See also:
Restoring factory default settings
97
