Toner Alarm
Purpose:
To specify how the printer responds when it is low on toner.
Values:
Off | An error message is displayed until someone replaces the toner cartridge. If an |
| Auto Continue value is selected from the Setup Menu, the printer resumes printing |
| after the specified timeout value. |
Single* | Printer stops printing, displays an error message, and sounds three quick beeps. |
Continuous | Printer stops printing, displays an error message, and repeats three beeps every 10 |
| seconds until the toner cartridge is replaced. |
See also:
Auto Continue
Wait Timeout
Purpose:
To specify the amount of time (in seconds) the printer waits to receive additional bytes of data from the computer. When this timeout expires, the print job is canceled.
Values:
Disabled | Disables Wait Timeout. |
15...65535 (40*) Specifies the amount of time the printer waits for additional data before it cancels the job.
Note: Wait Timeout is only available when you use PostScript emulation. This menu item has no effect on PCL emulation print jobs.
