99
Setup Required
What this message means:
•When you unpacked the printer, you left a piece of packing material inside.
•A hardware component, such as an optional paper drawer, has not been installed correctly.
What you can do:
•Remove all packing material from inside the printer.
•Correctly install the component.
See also:
Setup Guide
Staples Low
What this message means:
The stapler has only a few staples remaining.
What you can do:
•Press Go to continue printing.
•Install a new staple cartridge to clear the message.
Std Bin Full
What this message means:
The standard bin is full.
What you can do:
Remove the stack of paper in the bin to clear the message.