Printer Usage
Purpose:
To determine the behavior of the image transfer unit during printing.
Values:
Max Speed | The image transfer unit is engaged throughout the print job. |
Max Yield* | The image transfer unit position is engaged based on page content. This may |
| extend the life of certain print supplies. |
Resource Save
Purpose:
To determine what the printer does with downloaded resources, such as fonts and macros stored in RAM, if the printer receives a job that requires more memory than is available.
Values:
Off* | Printer retains downloaded resources only until memory is needed. It then deletes those |
| resources associated with the inactive printer language. |
On | Printer retains all downloaded resources for all printer languages during language changes |
| and printer resets. If the printer runs out of memory, |
| 38 Memory Full is displayed. |
Staple Alarm
Purpose:
To specify how the printer responds when it is out of staples.
Values:
Off* | Load Staples is displayed until someone loads staples. If an Auto Continue value |
| is selected from the Setup Menu, the printer resumes printing after the specified |
| timeout value. |
Single | Printer stops printing, displays Load Staples, and sounds three quick beeps. |
Continuous | Printer stops printing, displays Load Staples, and repeats three beeps every 10 |
| seconds until the staple cartridge is replaced. |
See also:
Auto Continue