For best print quality, make sure you align the image transfer unit after replacement or if colors print too lightly.
To align the image transfer unit:
1On the printer operator panel, press and hold Select and Return while turning the printer on.
2When Performing Self Test appears, release the buttons.
3When Config Menu appears, press Menu until you see ITU Alignment, and then press
Select.
A test page prints.
4Look at the test page and select a number value for each of the twelve settings where the color is most intense. Select a value in the range of
It is helpful to write all twelve alignment values in the lines provided on the test page before going on to step 5. You must select a value for all twelve settings.
5When you see Test A Alignment, press Menu until you find the number value you want to use, and then press Select. A Saved message briefly appears and then the next test alignment displays.
6After you have completed all twelve settings, Config Menu appears. Press Menu until you see
Exit Config Menu, and then press Select. The printer returns to the Ready state.
51
