Safety Information
DANGER
To avoid a shock hazard, do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm.
To avoid shock hazard:
•The power cord must be connected to a properly wired and earthed receptacle.
•Any equipment to which this product will be attached must also be connected to properly wired receptacles.
When possible, use one hand to connect or disconnect signal cables to prevent a possible shock from touching two surfaces with different electrical potentials.
Electrical current from power, telephone, and communications cables is hazardous. To avoid shock hazard, connect and disconnect cables as described following when installing, moving, or opening covers of this product or attached devices.
To Connect | To Disconnect | ||
1. | Turn Everything OFF. | 1. | Turn Everything OFF. |
2. | First, attach all cables to | 2. | First, remove power |
| devices. |
| cord(s) from outlet. |
3. | Attach signal cables to | 3. | Remove signal cables |
| receptacles. |
| from receptacles. |
4. | Attach power cord(s) to | 4. | Remove all cables from |
| outlet. |
| devices. |
5. | Turn device ON |
|
|
|
|
|
|
IMPORTANT:
When replacing the battery, use only IBM Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The
VIII
