IBM 6644, 6645, 6646 manual Bios Error Beeps List

Table 2-2 BIOS Error Beeps List

NOTE: To diagnose a problem, first find the BIOS error beeps in left column. If directed to a check procedure, replace the FRU indicated in the check procedure. If no check procedure is indicated, the first Action/FRU listed in right column is the most likely cause.

BIOS Error Beeps	Action/FRU
2-3-3	Enter BIOS Setup and load
Screen Retrace Tests In-	the default settings.
Progress or Error	System board.
3-1-1	Enter BIOS Setup and load
Timer Tick Interrupt Test	the default settings.
Error	System board.
3-1-2	Enter BIOS Setup and load
Interval Timer Channel 2	the default settings.
Test Error	System board.
3-1-4	Enter BIOS Setup and load
Time-Of-Day Clock Test	the default settings.
Error	System board.
3-2-4	Enter BIOS Setup and load
Comparing CMOs Memory	the default settings.
Size Against Actual	System board.
3-3-1	Insert the memory modules
Memory Size Mismatch	in the DIMM sockets
Occurred.	properly, then reboot the
	system.
	Memory module. See the
	“Step 005” of “Memory” on
	page 64 to replace memory
	module.
	System board

Check Procedures 47