Table 2-1 POST Error Codes and Messages List
NOTE: To diagnose a problem, first find the BIOS error messages or codes in left column. If directed to a check procedure, replace the FRU indicated in the check procedure. If no check procedure is indicated, the first Action/FRU listed in right column is the most likely cause.
BIOS Error Codes, | Action/FRU | |
Messages | ||
| ||
|
| |
0162 | ||
Invalid Configutation | Adapter card | |
Information | Drives | |
| Power supply | |
| System board | |
|
| |
0163 | Ensure the time set in BIOS | |
Time of Day not set | Setup is correct. | |
|
| |
0164 | Enter BIOS Setup and load | |
Memory Size Does Not | the default settings. | |
Match CMOS | DIMMs | |
| System board | |
|
| |
0166 | BIOS version. | |
Boot Block Checksum Error | BIOS ROM | |
|
| |
0167 | Enter BIOS setting to load | |
No Processor Update Found | default settings: | |
Error | 1. Proper speed for | |
| processor. Speed should | |
| be a multiple of the | |
| original processor. | |
| Reset the jumper.See | |
| ||
| page 22. | |
| Processor | |
|
| |
0168 | Enter BIOS Setup and load | |
the default settings. | ||
| Adapter card | |
| System board | |
|
| |
0175 | System board | |
Bad EEPROM CRC #1 |
| |
|
| |
0176 | Enter BIOS Setup and load | |
System Tampered | the default settings. | |
| System board | |
|
| |
0177 | System board | |
Inventory Violation |
| |
|
|
Check Procedures 39
