The following table lists specific keys on the keyboard that will help you move through the Setup menus:
Keys | Function |
Down- or up- | Use these arrow keys to highlight |
arrow key | an option on the menu. (Press the |
| Enter key to choose the option.) |
Left- or right- | Use these arrow keys to make a |
arrow key | selection and change an option's |
| setting. On some menus, you can |
| use these keys to move from one |
| field to another. |
F1 | Press this key if you want help for a |
| selected menu option. |
Esc | After viewing or making changes to |
| the settings on a menu, press this |
| key to exit the menu. |
Enter | Press this key to choose a |
| highlighted option from a menu |
F9 | Press this key if you want to reload |
| the current settings for a line |
F10 | Press this key if you want to load |
| the factory default settings from the |
| selected brackets. |
Changing Parameter Settings
In the Setup menus, the configuration information that you can change is enclosed in brackets like these: [ ]. You cannot change any information that is not enclosed in brackets. Use the up- or down- arrow keys to highlight options then press Enter to display a menu. When changing the setting of a particular parameter, highlight the setting then use the left- or right- arrow key to change the setting. Refer to the Configuration/Setup Utility help for details on the configurable parameters in each menu.
General Information 13
