•You might have to adjust the monitor controls to obtain the best image.
003 - DOES THE MONITOR SUCCESSFULLY PASS Run Normal Test? (YES, READ AHEAD. NO, GO TO STEP 004)
•You have successfully completed the video diagnostics tests. If the problem remains, go to “Index of Symptoms, Messages, Error Codes, or Beeps” on page 36
•End.
004 -
•Power off the system unit.
•Remove the hard disk drive system cable.
•Power on the system unit.
005 - IS THE SCREEN STILL NOT READABLE?
•Replace the monitor. If the symptom remains, replace the system board.
•End.
Check Procedures 71
