IBM 6646, 6645, 6644 manual CD-ROM Front Panel Introduction, Description

CD-ROM Front Panel Introduction

Item	Description
1	Load / eject button
2	Headphone jack
3	Power-on / busy indicator, lights up in
	green color while disc is set in ready
	state; lights up and flashes in amber color
	during data read or seek operation.
4	Headphone volume control
5	Emergency eject hole.
	See CD-ROM Emergency-exit <option 1>
	below.
	Disc tray and emergency eject
	See CD-ROM Emergency-exit <option 2>
	below.
6	Audio Play / Skip track control button

CD-ROM Emergency-exit <option 1>

If for any reason the tray does not eject automatically, insert and press an eject-bar inside the emergency eject hole to manually eject the tray. A straightened paper clip with a diameter of 1.2

mm(typical) can be used as an eject-bar.

ATTENTION: Make sure to turn off the power before manual disc eject operation.

CD-ROM Emergency-exit <option 2>

Locate the bottom edge of the disc tray. Gently pry the disk tray open with a screwdriver. When the disc tray opens, simply remove the disc from the CD-ROM drive.

114 IBM Desktop System HMM