power

Turn the server on and off remotely.

reboot

Force the server to restart.

sel get

Display the BMC system event log.

sol

Configure the SOL function.

sysinfo

Display system information that is related to the server and the globally unique identifier (GUID).

Using the SAS/SATA Configuration Utility program

Use the SAS/SATA Configuration Utility program to configure SAS devices.

Starting the SAS/SATA Configuration Utility program

To start the SAS/SATA Configuration Utility program, complete the following steps:

1.Turn on the server.

2.When the prompt <<< Press <CTRL><A> for Adaptec SAS/SATA Configuration Utility! >>> appears, press Ctrl+A.

3.To select a choice from the menu, use the arrow keys.

4.Follow the instructions on the screen to change the SerialSelect Utility or Disk Utilities settings.

SerialSelect Utility menu choices

The following choices are on the SerialSelect Utility menu:

vSAS Controller Configuration

Select this choice to view or change SAS controller settings. To reset the controller to its default settings, press F6 and follow the instructions on the screen.

vPHY Configuration

Select this choice to view or change PHY configuration settings. To reset the controller to its default settings, press F6 and follow the instructions on the screen.

Disk Utilities

Select this choice to format, verify, or locate SAS devices. Select a device from the list and read the instructions on the screen carefully before making a selection.

Using ServeRAID Manager

Use ServeRAID Manager, which is on the IBM ServeRAID Support CD, to:

vConfigure a redundant array of independent disks (RAID) array

vRestore a SCSI hard disk drive to the factory-default settings, erasing all data from the disk

vView the RAID configuration and associated devices

vMonitor the operation of the RAID controllers

Chapter 3. Configuring the server 79

Page 91
Image 91
IBM 71455DU manual Using the SAS/SATA Configuration Utility program, Starting the SAS/SATA Configuration Utility program