Intel 410 manual Optional: Make disk logical names permanent

Getting Started - RAID Array 410 for Windows NT – Intel

Figure 4–4 Partition Pull-Down Menu

See Figure 4–5 Create Primary Partition Window

In the window, enter the size partition you want, then click on OK. (Depending upon the partition size you choose, a message window may appear asking you to confirm your selection.)

2.Continue to create new partitions until all disks have been partitioned.

3.Optional: Make disk logical names permanent.

The process of creating partitions assigns a logical name (the letter “C,” “D,” etc.) to each partition. These letter assignments, under Windows NT, will normally “float.” That is, they are subject to changing (after reboot), if the disk configuration changes.

EK–SMRAC–IG. C01 4–5