Filename [DR-MV1SEK_04Name.fm]
Masterpage:Left+

20 EN

Page 20 April 23, 2004 9:40 am
INITIAL SETTINGS

Auto Channel Set by Downloading from TV/Auto Clock

Set/Auto Guide Program Number Set

If you have connected the unit to your TV via a 21-pin SCART
cable (pg. 18), the unit will automatically perform Preset
Download instead of the Auto Set Up in step 2 on page 19. After
downloading, the unit sets the clock and Guide Program numbers
automatically.
1Press 1 to turn on the unit. The Country Set display appears
on the TV screen. The AUTO SET/T-V LINK display appears on
the TV screen.
2Press rt to select “T-V LINK” and press ENTER. The T-V
LINK screen will appear, and the unit automatically performs Auto
Channel Set.
When Auto Channel Set is
completed, “PLEASE WAIT” will
be displayed for about 90 seconds,
since channel data is exchanged
between the DVD deck and the
VHS deck. No operation will be
done during this time.
A
TTENTION:
Preset positions on the front display
panel increase from “PR 1”; do NOT
press any button on the unit or
remote control until the front display
panel shows clock time, “PR 1” or
“– –:– –” as illustrated on page 21.
NOTES:
For details, refer to the instruction
manual of your TV.
In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto Clock Set
nor Auto Guide Program Number Set.
If there is a power cut, or if you press 1 or SET UP while
downloading or set up is in progress, it will be interrupted; be sure to
turn off the unit power once and try again from the beginning.
Auto Clock Set may not function properly depending on the reception
condition.
On this unit, the characters available for station names (ID) are A–Z,
0–9, –, f, + and I (space). Some names of downloaded stations
may differ from those of your TV. (pg. 85)

Preset Download

A
TTENTION:
You can use this function only with a TV offering T-V Link, etc.* Be
sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
1
4
7
2
5
8
0
3
6
9
VCR/DVD
rtw e
ENTER
SET UP
SAT
Slide the TV/CABLE/SAT/DVD switch to DVD.
After “Preset Download” is completed, perform “Monitor Set
(DVD Deck Only)” on page 25.
DR-MV1SEK_04Name.fm Page 20 Friday, April 23, 2004 9:41 AM