JVC DR-MV1B manual Setting The Progressive Mode Programme Playback, While stopped

Filename [DR-MV1SEK_05DVD Operation1.fm]
DR-MV1SEK_00.book Page 39 Thursday, April 15, 2004 3:30 PM	Masterpage:Right+
	OPERATIONS ON DVD DECK EN 39

Setting The Progressive Mode Programme Playback

You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source).

1 Press ON SCREEN twice to access the on-screen bar.

2Press w e to select “ ”, then press ENTER. The pop-up window appears under the selected item.

3Press rt to select the desired option, then press ENTER.

AUTO 1: Used to play a disc containing both video and film source materials. This system recognises the source type (video or film) of the current disc according to the disc information. Normally select this option.

AUTO 2: Almost the same as the “AUTO 1”, but the processing of the scenes with movement is different. Select “AUTO 1” or “AUTO 2” to your preference.

FILM: Suitable for playing back a progressive scanned film source disc.

VIDEO: Suitable for playing back a video source disc. The outlines on the played back pictures will be soft.

To clear the on-screen bar

Press ON SCREEN.

NOTE:

When the progressive mode is set, be sure to set “L-1 OUTPUT” to “COMPONENT”. ( pg. 74) Progressive scan is output only from COMPONENT VIDEO OUT connector.

You can play back up to 30 tracks in the desired order.

While stopped

1 Press ON SCREEN twice to access the on-screen bar.

2 Press w e to select “PRGM”, then press ENTER. The programme table appears under on-screen bar.

3 Press the number keys to enter the track numbers in the desired order.

Examples:

ATo select track 5, press the

number key “5” and ENTER. B To select track 15, press the number key “1” and “5”.

CTo select track 25, press the number key “2” and “5”.

If you have specified a wrong selection

Press CANCEL (&). The last selection is erased.

Or press CLEAR (8). The whole selection is erased.

4Press 4. Playback starts in the programmed order.

●When all of the programmed tracks have been played back, Programme Playback stops, but the programmed information remains.

●To add tracks to the end of the programme, perform steps 1 through 3.

●During Programme Playback, pressing 6 skips to the next selection of the programme. Pressing 2 returns to the beginning of the current selection.

To clear the on-screen bar and the contents of the programme Press ON SCREEN.

To cancel Programme Playback

Press w e to select “PRGM”, then press ENTER.

NOTE:

Programme Playback is not possible depending on the type of disc.

Page 39

April 15, 2004 11:41 am