Filename [DR-MV1SEK_09Editing.fm]
Masterpage:Left0

78 EN

Page 78 April 15, 2004 3:18 pm

SYSTEM CONNECTIONS

Simple Connections

Connect the satellite receiver to the L-2 IN/DECODER connector,
then connect the L-1 IN/OUT connector to the TV’s connector.
NOTES:
Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. (pg. 74)
You can use the Automatic Satellite Programme Recording function
(pg. 50) with this connection. (DVD deck only)
To record a programme via the satellite receiver, select L-2 mode by
pressing PR +/– so that “L-2” appears on the front display panel.
For details, refer to the instruction manual of the satellite receiver.

Connecting To A Satellite Receiver

IMPORTANT
When you set “L-2 SELECT” to “SAT VIDEO” or “SAT S-VIDEO”
(pg. 74), it is possible to view a satellite broadcast with the TV
set to its AV mode even if the unit is turned off. When the unit is
in Stop mode or recording, press TV/VCR on the remote control
to turn off the VCR indicator on the unit.
If you turn on the unit when the satellite receiver’s power is off,
nothing appears on the TV screen. In this case, turn on the satellite
receiver, or set the TV to its TV mode, or press TV/VCR on the
remote control to set the unit to the AV mode.
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
TV
ANTENNA OUT
ANTENNA IN
DR-MV1SEK_00.book Page 78 Thursday, April 15, 2004 3:30 PM