JVC DR-MV1B manual Playback Features High-Speed Search, Quick Rewind a Little, Index Search

Filename [DR-MV1SEK_07VCR Operation.fm]
DR-MV1SEK_00.book Page 52 Thursday, April 15, 2004 3:30 PM	Masterpage:Left+

52 EN OPERATIONS ON VCR DECK

Playback Features				High-Speed Search
				During playback, press 5 for forward high-speed search, or 3
				for reverse high-speed search.
● Turn on the unit.				● Each press of the button increases the search speed for each
● Turn on the TV and select the AV mode.				direction.
● Slide the TV/CABLE/SAT/DVD switch to DVD.				When pressing 5:
● Press VCR/DVD repeatedly so that the VCR lamp lights up on the				(SP): +5x{+7x
unit.				(EP): +11x{+21x
				When pressing 3:
				Once 3 is pressed, reverse search starts in –1x normal playback
				speed. After this process, each press of 3 changes the search
VCR/DVD			SAT	speed between –5x and –7x in SP mode, –11x and –21x in EP mode.
1	2	3	1	(SP): –1x]–5x{–7x
				(EP): –1x]–11x{–21x
4	5	6
7	8	9		● To resume normal playback, press 4.
	0

2 6

4

3 5

8 9

REC MODE

PR +/–

AUDIO

Quick Rewind A Little

During playback (or Live Memory Playback), press . The unit rewinds the picture a little (about 7 seconds) and resumes playback.

●If the button is pressed repeatedly, the unit rewinds the pictures continuously and resumes playback.

Skip Search

During playback, press 1 to 6 times to skip over unwanted sections.

ATTENTION:

In the search, still, slow-motion or frame-by-frame playback mode,

●the picture will be distorted.

●the noise bars will appear.

●there may be a loss of colour.

●you cannot hear the sound.

Still Picture/Frame-By-Frame Playback

1 Press 9 to pause playback.

●If there is vertical jitter, press PR +/– to correct the picture.

2Press 9 to activate frame-by-frame playback.

● To resume normal playback, press 4.

Slow Motion

1 Press 9 to pause playback.

2 Press and hold 9 for 2 seconds, then release. Press 9 and release again to return to still picture.

●The speed changes for each direction by pressing 3 and 5 repeatedly.

●To resume normal playback, press 4.

NOTE:

During slow motion playback, some noise may appear on the TV screen. Press PR + or – to eliminate the noises.

●Each press initiates an approximately 30-second period of fast- motion playback. Normal playback resumes automatically.

●To resume normal playback, press 4.

Index Search

Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the unit is in the Stop mode.

Press 2 or 6 to activate Index Search. “2 1” or “6 1” is displayed on the TV screen and search begins in the corresponding direction.

●To access index codes 2 through 9, press 2 or 6 repeatedly until the correct index number is displayed.

Example:

To locate the beginning of B from the current position, press 2 twice.

To locate the beginning of D from the current position, press 6 once.

Current position

Index number

●When the specified index code is located, playback begins automatically.

Page 52

April 15, 2004 1:27 pm