Filename [DR-MV1SEK_05DVD Operation1.fm]

 

DR-MV1SEK_00.book Page 28 Thursday, April 15, 2004 3:30 PM

Masterpage:Left+

 

28 EN OPERATIONS ON DVD DECK

Resume Function

SAT

1 2 3

4

5

6

7

8

9

DISPLAY

0

MARK

 

MENU

TOP MENU

 

rtw e

ENTER

2 6

4

SLOW– (3) SLOW+ (5)

8 9

REMAIN

ANGLE

SUBTITLE

Still Picture/Frame-By-Frame Playback

1 Press 9 to pause playback.

2Press 9 or w e to activate frame-by-frame playback.

Each press of 9 advances the still picture frame by frame.

Each press of w e advances/reverses the still picture frame by frame.

Frame-by-frame playback for reverse direction cannot be performed with Video CD/SVCD discs.

To resume normal playback, press 4.

Slow Motion

1 Press 9 to pause playback.

2Press SLOW – (3) or SLOW + (5).

Each press of SLOW – (3) or SLOW + (5) increases the slow motion speed for each direction (from 1/16 to 1/2 times the normal speed).

Slow motion for reverse direction cannot be performed with Video CD/SVCD discs.

OR

Press SLOW – (3) or SLOW + (5) for 2 or more seconds.

Skip Search

During playback, press .

Each press initiates an approximately 30-second period of fast- motion playback. Normal playback resumes automatically.

It is possible to memorise the position where you stop playback and resume playback from that position.

Be sure to set “RESUME” to “ON” or “DISC RESUME”. ( pg. 81)

1 Press 8 during playback to memorise a resume point.

The unit enters Resume Stop mode and memorises the position where you have stopped playback as a resume point. (The inside of the disc status indicator on the front display panel blinks while memorising.)

The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected if “RESUME” is set to “DISC RESUME”. ( pg. 81)

To clear the resume points:

(The inside of the disc status indicator stops blinking and lights.)

When “RESUME” is set to “ON”:

Press 1 to turn off the unit.

Press x to take out the disc.

Press 8 in stop mode.

Press TOP MENU to display the top menu, then start playback by selecting an item, etc.

Press MENU to display the disc menu, then start playback by selecting an item, etc.

When “RESUME” is set to “DISC RESUME”:

Set “RESUME” to “OFF”. ( pg. 81)

Press 8 in stop mode.

Press TOP MENU to display the top menu, then start playback by selecting an item, etc.

Press MENU to display the disc menu, then start playback by selecting an item, etc.

2 Press 4 in stop mode to resume playback. The unit starts playback from the resume point.

NOTES:

“DISC RESUME” setting works on DVD VIDEO, VCD, SVCD and already finalised DVD-R/DVD-RW (video mode) discs. For other types of discs, the function under “ON” setting will be applied even if “RESUME” is set to “DISC RESUME”. ( pg. 81)

If you stop the playback of a disc for which an resume point has already been memorised, the memory will be updated with the new resume point.

After the unit has memorised the resume point for 30 discs, remembering a new resume point will cause the unit to delete the oldest memorised point. Stopping playback of a disc for which a resume point is already stored may change the order in which the points are stored. This may potentially change the order in which points are deleted.

When the unit memorises a resume point for a disc, it also remembers audio language, subtitle and angle settings.

This function may not work for some Video CD/SVCD.

When “RESUME” is changed to “ON” or “OFF” ( pg. 81), resume points of the discs memorised with “RESUME” set to “DISC RESUME” will be cleared.

Resume points are memorised for each side of a double-sided disc.

Page 28

April 15, 2004 11:41 am

Page 28
Image 28
JVC DR-MV1B manual Resume Function, Still Picture/Frame-By-Frame Playback, Slow Motion, Skip Search