JVC DR-MV1B manual Scan Mode Set, Tray Lock DVD Deck Only, To lock tray, To unlock tray

Filename [DR-MV1SEK_10Subsidiary.fm]
DR-MV1SEK_10Subsidiary.fm Page 89 Thursday, April 22, 2004 6:38 PM	Masterpage:Right+

SUBSIDIARY SETTINGS EN 89

Scan Mode Set

If you connect the unit and TV with Component Video Connection (
pg. 18), you can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher-quality images. For details, refer to “GLOSSARY”

(
pg. 95).

ATTENTION:

Your TV needs to be compatible with PAL Progressive.

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

VCR/DVD SAT

1 2 3

4 5 6

7 8 9

0

PROGRESSIVE SCAN

1 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.

2 Press PROGRESSIVE SCAN for 3 or more seconds.

●Video output indicator () lights on the front display panel if Progressive scan mode has been established. (
pg. 14)

●Each press of PROGRESSIVE SCAN for 3 or more seconds switches the scan mode.

NOTES:

●When the progressive mode is set, be sure to set “L-1 OUTPUT” to “COMPONENT”. (
pg. 74) Progressive scan is output only from COMPONENT VIDEO OUT connector.

●Interlaced scan mode is the setting at your purchase.

●Interlaced scan mode might be suitable depending on video material.

●Scan mode cannot be set while menu screen is displayed.

●When the Progressive scan mode is engaged, no video signal is output from S-VIDEO OUT connector and L-1 IN/OUT connector.

Watch the image on VCR deck in the Progressive scan mode via component video

ASet the Progressive-compatible TV to the component input mode.

B Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit, then press PROGRESSIVE SCAN for 3 or more

seconds so that the Video output indicator () lights on the front display panel.

C Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.

D Press VCR].

● “VCR]” lights up on the unit. E Insert a cassette and press 4.

NOTES:

●Be sure to engage the DVD deck in stop mode.

●It is not possible to perform the above steps when the DVD deck is in timer standby mode.

●If the image and sound is distorted, press VCR/DVD repeatedly.

Tray Lock (DVD Deck Only)

You can lock the disc tray to prohibit the unwanted disc ejection by children.

●Turn off the unit when the DVD deck is selected.

x 8

To lock tray

While the unit is turned off, press and hold 8, then press x on the unit. “LOCKED” appears on the front display panel and the disc tray is locked.

To unlock tray

While the unit is turned off, press and hold 8, then press x on the unit. “UNLOCK” appears on the front display panel.

Page 89

April 22, 2004 6:32 pm