JVC DR-MV1B manual Dubbing An Entire Disc, Load a disc you want to dub

Filename [DR-MV1SEK_09Editing.fm]
DR-MV1SEK_00.book Page 69 Thursday, April 15, 2004 3:30 PM	Masterpage:Right+

				EDITING EN 69
Disc Dubbing (From DVD To VCR)				1 For DVD deck
				Load a disc you want to dub.
Dubbing An Entire Disc				For VCR deck
				Load a cassette with the record safety tab intact.
Because this unit includes both DVD deck and VCR deck, you can				2 Press VCR/DVD repeatedly so that the VCR lamp lights up on
easily use this unit for dubbing without connecting any other				the unit.
				3 Press REC MODE repeatedly to set the recording mode.
equipment.
● Turn on the unit.				4 Press }DVD to select the dubbing direction.
				● “}DVD” lights up on the unit.
● Turn on the TV and select the AV mode.
				5 Press and hold DUB for more than 2 seconds to start the
● Slide the TV/CABLE/SAT/DVD switch to DVD.
				dubbing.
			} DVD	● If the tape has not been rewound, the VCR deck rewinds the tape
				automatically. When the VCR deck has finished rewinding, dubbing
				begins automatically.
				● After dubbing is completed, the VCR deck rewinds the tape
				automatically and the unit shuts off.
				● To stop dubbing, press 8.
				NOTES:
				● It is not possible to start dubbing if the unit retains a memory of the
VCR/DVD		8	DUB	resume points. Press 8 twice to clear the resume points.
				● There may be a discrepancy of several seconds between where you
				intend dubbing to start, and where it actually stars.
				● The superimposed indication during the operation or dubbing is not
VCR/DVD		SAT		recorded.
				● When the end of the tape is reached during dubbing, the tape is
1	2	3		ejected and both deck stops.
4	5	6		● When the progressive mode is set, “}DVD” does not light up on the
7	8	9		front display panel. Press PROGRESSIVE SCAN so that video
	0
				output indicator ( ) lights off on the front display panel.
		PROGRESSIVE SCAN
				● It may be impossible to dub a DVD-R or DVD-RW (Video mode) disc
				recorded on the devices from other manufacturers or on a PC. In
				such case, perform “Manual Dubbing (From DVD To VCR)”
				( pg. 70).
				● It is not possible to perform other operations like Live Memory
8				Playback. Check the recorded programme on the disc after dubbing.
				● If “VCR]” lights up on the unit and you play back a DVD VIDEO disc,
REC MODE
				the images dubbed to the VCR deck may not be output to the TV
				properly.

Page 69

April 15, 2004 3:18 pm