Masterpage:Right+
EN 45
Filename [DR-MV1SEK_06DVD Operation2.fm]
Page 45 April 15, 2004 3:30 pm
OPERATIONS ON DVD DECK
You can programme this unit to timer-record as many as
8 programmes.
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the PlusCode number.
1Load a recordable disc.
2Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
3Press VIDEO Plus+ to access the VIDEO Plus+ screen.
4Press the number keys to
enter the PlusCode number of a
programme you wish to record,
then press ENTER.
●If you have made a mistake, press
CANCEL (&) and input the correct
number before you press ENTER.
●To clear all entered numbers at a
time, press CLEAR(8).
●If the number you entered is invalid, “PlusCode NO. ERROR
CONFIRM PlusCode NO. THEN RETRY” appears on the TV screen.
Input a valid PlusCode number.
●If “GUIDE PROGRAMME IS NOT SET SELECT CHANNEL YOU
WANT TO RECORD” appears on the TV screen, set Guide Program
numbers manually. (墌pg. 83)
●When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel some
of the reserved programmes. (墌pg. 49)
5The PlusCode number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
programme data.
●To cancel this setting, press VIDEO Plus+ or RETURN.
6Press we to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
●“STOP” (To advance/go back the stop time by 30 minutes, press and
hold rt).
●“DAILY/WEEKLY” (墌pg. 45, “Daily/Weekly Recording”)
●“REC MODE” (墌pg. 42, “Recording Mode”)
●“NAME” (墌pg. 61, “Modify Programme Name”)
●“VPS/PDC” (墌pg. 57, “PDC Recording”)*
* VPS (Video Programme System) recording is not currently available
in the U.K. and not possible with this unit.
7Press ENTER to access the Programme Confirmation screen.
8Press ENTER to complete timer programming.
●To programme another timer, repeat steps 3–8.
●If “PROGRAM OVERLAPPED” appears on the TV screen, see
page 49.
9Press DVD TIMER (#) to engage the unit’s timer mode. The
DVD timer lamp lights up on the unit and the VCR deck is
automatically selected. Press 1 to turn off the unit. When the
VCR deck is in timer standby mode, the unit is automatically turned
off.
●To disengage the timer mode, press DVD TIMER (#) again.
NOTES:
●There may be cases that VIDEO Plus+ Timer Programming function
prolongs the stop time of the programming.
●When two successive programmes are recorded on a DVD-RW disc
with VIDEO Plus+ Timer Programming function, the beginning of the
second one may be left off the recording.
●VIDEO Plus+ Timer Programming is not possible on the discs used
exclusively for On-Disc Timer Programming.
●If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.

Daily/Weekly Recording

You can record programmes with one of the following weekly/daily
timer settings.
WEEKLY: Select to record a weekly programme.
MON–FRI: Select to record a daily programme from Monday
through Friday.
MON–SAT: Select to record a daily programme from Monday
through Saturday.
SUN–SAT: Select to record a daily programme from Sunday
through Saturday.

VIDEO Plus+® Timer Programming

●Make sure that the unit’s built-in clock is set properly.
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/SAT/DVD switch to DVD.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “VIDEO Plus+® System Setup” (墌pg. 83) and
set the Guide Program number correctly.
1
4
7
2
5
8
0
3
6
9
0 – 9
RETURN
ENTER
VIDEO Plus+
CLEAR (8)
CANCEL (X)
DVD TIMER (#)
VCR/DVD
SAT
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s
programme number has been changed, the wrong programme
number will be displayed on the VIDEO Plus+ programme screen in
step 5. When this happens, set the correct Guide Program number
for that station. (墌pg. 83, “VIDEO Plus+® System Setup”)
Satellite Receiver Users
To timer-record a satellite broadcast using the VIDEO Plus+
system:
APerform “Satellite Receiver Control Setting (DVD Deck Only)”
(墌pg. 23).
BPerform “VIDEO Plus+® Timer Programming” (墌pg. 45).
CLeave the satellite receiver’s power on.
DR-MV1SEK_00.book Page 45 Thursday, April 15, 2004 3:30 PM