JVC DR-MV1B Prepare the VCR deck for dubbing, Prepare the DVD deck for dubbing, Record Pause mode

Filename [DR-MV1SEK_09Editing.fm]
DR-MV1SEK_00.book Page 68 Thursday, April 15, 2004 3:30 PM	Masterpage:Left+

68 EN EDITING

Manual Dubbing (From VCR To DVD)		1 For DVD deck
		Load a recordable disc.
Dubbing A Part Of A Cassette		For VCR deck
		Load a cassette you want to dub.
You can dub the selected scenes on a tape to the DVD disc,		2 Press VCR] to select the dubbing direction.
starting and stopping wherever you wish.		● “VCR]” lights up on the front display panel.
		3 Prepare the VCR deck for dubbing.
● Turn on the unit.		A Press VCR/DVD repeatedly so that the VCR lamp lights up on
● Turn on the TV and select the AV mode.		the unit.
● Slide the TV/CABLE/SAT/DVD switch to DVD.		B Locate the point from where you want to start dubbing, then
	4 9 5 VCR ]	pause playback by pressing the following buttons: 4, 5, 3,
		8, 9
		4 Prepare the DVD deck for dubbing.
		A Press VCR/DVD repeatedly so that the DVD lamp lights up on
		the unit.
		B Press REC MODE repeatedly to set the recording mode.
		C Press and hold 9, then press 7 so that the DVD deck enters
		the Record Pause mode.
VCR/DVD	8 73 DUB	5 Press and hold DUB for more than 2 seconds to start dubbing.
		6 Press 8 to stop recording on the DVD deck. Then press VCR/

DVD, and press 8 to stop playback on the VCR deck.

NOTES:

VCR/DVD		SAT
1	2	3
4	5	6
7	8	9
	0

4

3 5

8 9

REC MODE

7

●If you set the dubbing direction incorrectly, you could erase an important recording that you wanted to dub. It is recommended to conduct a test with unimportant cassettes first.

●There may be a discrepancy of several seconds between where you intend dubbing to start, and where it actually stars.

●The superimposed indication during the operation or dubbing is not recorded.

●It is not possible to dub a tape with a copy protection signal.

●If the recording capacity of disc become full, the tape stops automatically.

●It is not possible to perform other operations like Live Memory Playback. Check the recorded programme on the disc after dubbing.

●Dubbing is not possible on the discs used exclusively for On-Disc Timer Programming.

Page 68

April 15, 2004 3:18 pm