JVC GR-DVM1DU manual Indoor Use, Using The CAM Stand, Supply Power, Attach to CAM Stand

10

GETTINGSTARTED (Cont.)

AC Power Adapter/Charger

DC cord

Power cord Bottom of the camcorder

d c

b a

Lens

B

D

	DC-IN
Core Filter	Connector is under	CAM Stand
	this cover	A
		C

Indoor Use

When using the camcorder indoors, you can use the AC Adapter instead of a battery.

1 SUPPLY POWER TO ADAPTER Plug the AC Adapter/Charger's power cord in to an AC outlet.

2 SUPPLY POWER TO CAMCORDER Connect the AC Adapter to the camcorder.

Using The CAM Stand

During Playback

If you leave the camcorder's power on for a long time while using it on a table top etc., the camcorder's surface may become hot. Attach it to the CAM Stand and play back.

During Recording

It is recommended to use the CAM Stand while shooting from a table top or any other flat surface. This provides stability to the camcorder.

NOTES:

●When using the provided DC cord, make sure you connect the end of the cable with the core filter to the camcorder. The core filter improves performance of equipment.

●When using the AC Power Adapter/Charger, the “Battery Low” indicator (☞ pg. 75) may appear. This is not a malfunction.

1

2

SUPPLY POWER

Plug the DC cord into the camcorder.

ATTACH TO CAM STAND

Line up A with a , B with b , C with c , and

Dwith d . Slide the camcorder in the direction of the arrow.

•To detach the camcorder, slide it in the opposite direction of the arrow.