REMOVING THE MEAT PROBE JACK
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1.Unplug range or disconnect power.
2.Open the oven door and remove the racks from inside the oven.
3.Pull the range away from the wall so that you can access the left side of the unit.
4.Remove the left side panel (see page
Meat Probe Jack
5.Lift the
Meat Probe Cap
6.Use a 16mm socket and remove the meat probe jack nut and felt washer from the oven liner.
16mm Socket
7.Remove the metal sleeve and disconnect the wires from the meat probe jack termi- nals, then remove the jack from the unit.
Metal Sleeve
Meat Probe Jack
Violet & Red Wires
