5-9COOLING FAN MOTOR
Refer to page 4-20 for the procedure for servic-
ing the cooling fan motor.
1. Unplug range or disconnect power.
2. Set the ohmmeter to the R x 1 scale.
3. Touch the ohmmeter test leads to the
cooling fan motor terminals. The meter
should indicate between 55 and 75 Ω.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
OVEN TEMPERATURE SENSOR
Refer to page 4-18 for the procedure for servic-
ing the oven temperature sensor.
1. Unplug range or disconnect power.
2. Set the ohmmeter to the R x 100 scale.
3. Touch the ohmmeter test leads to the
oven temperature sensor connector pins.
The meter should indicate between 1000
and 1100 Ω at 75˚F.