REMOVING THE CONVECTION BAKE ELEMENT & FAN MOTOR
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1.Unplug range or disconnect power.
2.Open the oven door and remove the racks from inside the oven.
3.Remove the two screws from the convec- tion fan motor cover, then unhook the bottom tab from the liner slot, and remove the cover.
Screw & | Convection Fan | Screw & | |
Motor Cover | Lockwasher | ||
Lockwasher | |||
|
|
Cover Tab
4.To remove the convection bake ele- ment:
a)Remove the three screws from the ele- ment bracket and bottom clip.
Convection Bake Element Bracket Screws
Convection Bake Element & Fan Motor
Bottom Clip Screw
