KitchenAid KESH307H, KESC300H, KESC307H manual Removing the Oven Door, To reinstall the oven door

REMOVING THE OVEN DOOR

1.To remove the oven door, open the door to its first stop.

2.Grasp the sides of the door, lift it slightly, and pull the door forward until the hinge hangers are partially out of the slots in the chassis. Do not completely remove the hinge hangers from the slots, since there will be spring tension on them.

Partially Remove

Door

3.Reposition the angle of the door to its vertical position to remove the spring ten- sion on the hinge hangers, then pull the hangers the rest of the way out of the chassis slots.

Hinge Hanger

Keep Door

Vertical

To reinstall the oven door:

1.Grasp the sides of the door and insert the hinge hangers into the hinge slots. Lift the door slightly and push in at the bottom until the hangers are fully installed in the unit. NOTE: If the hinge hangers are not seated properly, the door will not close tightly and may be off-center. To seat the hinge hang- ers, keep the door vertical, then lift it slightly, and push in on the bottom until the hangers are fully seated.

2.Open and close the oven door to make sure that it operates and seals properly.

4-22