REMOVING THE COOKTOP GLASS

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Unplug range or disconnect power.

2.Pull the range out of its mounting location so that you can access the side trim.

3.Remove the control panel from its subchassis, (see page 4-2 for the proce- dure), and set it on the subchassis.

4.Remove the two screws from the left and right side trim. Do not remove the trim at this time.

Right Side

Trim Screws

5.Raise the cooktop and prop it up (see steps 3 and 4 on page 4-5 for the proce- dure).

6.Loosen the left and right tension bracket screws and remove the brackets from behind the side trim.

7.Remove the wire clip from the left side trim.

Right Tension

Left TensionBracket

Bracket & Clip

Continued on the next page.

4-7

Page 33
Image 33
KitchenAid KESH307H, KESC300H, KESC307H manual Removing the Cooktop Glass