4-25

REMOVING THE OVEN DOOR GASKET
REASSEMBLY NOTE: After the door gasket is
installed, make sure that it is even along the
surface of the door when the door is closed.
1. Unplug range or disconnect power.
2. Pull the range away from the wall so that
you can access the rear of the unit.
3. Loosen the two oven liner screws so that
the inside of the hex-head skirt is approxi-
mately 1/2″ from the chassis.
4. Pull the oven liner forward to loosen the
oven door gasket from the front of the unit.
5. Starting at one end, pull the gasket out of
the liner hole, and remove it from around
the liner and the second hole.
Pull Oven Liner Forward
To Release Gasket
Pull Door Gasket Out Of Hole
And Remove From Liner
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
2 Oven Liner Screws