REMOVING THE DUAL BROIL ELEMENT
AND THE HIDDEN BAKE ELEMENT
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1.Unplug range or disconnect power.
2.Open the oven door and remove the racks from inside the oven.
3.To remove the dual broil element:
a)Remove the two screws from the dual broil element brackets.
Dual Broil Element
b)Pull the element forward and unhook the front bracket tabs from the liner slots, then pull the element wires through the liner holes, and disconnect them from the terminals.
2 Red Wires | Blue & Violet Wires |
Tab | Tab |
|
4.To remove the hidden bake element:
a)Remove the right side panel (see page
b)Spread the insulation away from the front of the hidden bake element.
Insulation
Bracket Screws
