b)Pull the bake element forward so the wire connectors are accessible, then disconnect the wires from the termi- nals. NOTE: Be careful that the wires do not pull back into the oven liner hole.
Convection Bake Element Wires
5.To remove the convection fan motor:
a)Use a large screwdriver or a 13 mm socket, and remove the cap nut (clock- wise) from the convection fan, then pull the fan off the convection fan motor shaft.
Convection
Fan
Cap Nut
b)Pull the range away from the wall so that you can access the rear of the unit.
c)Remove the rear panel (see step 3a on page
Convection Fan Motor
d)Remove the three screws from the con- vection fan motor.
e)Disconnect the wires from the termi- nals.
Convection Fan Motor Wires
3 Screws
