Vacuuming the scanner Before cleaning the imaging area, it is suggested that you vacuum the inside of the scanner to remove any dust and debris.
Cleaning the imaging 1. Remove dust and debris from this area by using a Staticide wipe or
areaa small brush. Be careful not to scratch the imaging area when cleaning.
IMPORTANT: Staticide wipes contain isopropanol which can cause eye irritation and dry skin. Wash your hands with soap and water after performing maintenance procedures. Refer to the MSDS for more information.
2.Wipe the upper and lower imaging area again with an
3.When finished, close the scanner cover.
| 99 |
