Blank image detection — select the image size (KB), below which an image is determined to be blank. Images with sizes less than the number you select will not be created. If you use this option, you must specify a blank image size for each image type (Binary, Gray and Color) you want to delete. If you do not make an entry in these fields, all images are kept.

Multi-feed Detection options

Length Detection  this option can be enabled or disabled. The default is disabled. If enabled, select the maximum length of the document that can be scanned without a multi-feed being detected. Length detection is used when scanning same-sized documents to check for overlap. For example, if you are scanning 8.5 x 11-inch (A4) documents in portrait mode, enter a value of 11.25 inches (28.57 cm) in the Maximum Length field. The maximum value is 13.99 inches (35.56 cm).

Auto Set: automatically sets the maximum length value to .50-inch (1.27 cm) greater than the length of the currently selected page size.

Ultrasonic Detection — check this option to set multi-feed detection.

Sensitivity — controls how aggressively the scanner will work to determine if more than one document is fed into the transport. Multi- feeds are triggered by detecting air gaps between documents. This allows multi-feed detection to be used with job sets containing documents with mixed thicknesses. You may set the Multi-Feed Detection to High, Medium or Low sensitivity.

Low: the least aggressive setting and is less likely to detect labels, poor quality, thick or wrinkled documents as multi-fed documents.

Medium: use Medium sensitivity if your application has varying document thickness or labels attached to the document. Depending on the label material, most documents with labels should not be detected as a multi-fed document.

High: the most aggressive setting. This is a good setting to use if all documents are similar in thickness to 20-lb. Bond paper.

Action — select an option of how you want to the scanner to perform if it detects a multi-fed document.

Beep and continue: if selected, the scanner will beep, display and log the condition but continue to operate.

End of Job: if selected, the scanner log the condition and stop the feeder and transport (the scanner will be disabled).

Alarm - select this option if you want the scanner to make a sound when a multi-feed is detected. You can click the Speaker icon to display the Open dialog box. From the Open dialog box, select the desired .wav file and click OK.

Calibrate — the Kodak i1200/i1300 Scanners automatically calibrate. This option is available if a Kodak representative directs you to calibrate the scanner using this option.

A-61560 June 2006

81

Page 85
Image 85
Kodak i1200 manual Multi-feed Detection options