Using different settings for each side of a document - Example 3

9.If you look on the Image Settings window, the Side drop-down box will now have two entries: Both: Color (24 bit) and Both: Black and White (1bit). Select one side and adjust the settings on the rest of the tabs of the Image Settings window (General, Size, Adjustments and Enhancements).

10.Then select the other side and make the appropriate selections for that type of image. You may want to scan a test document using the Preview window while you make these changes.

11.Save your Setting Shortcut and scan your test documents using the Setting Shortcut you just set up. Review the resulting images to determine if the scanner is detecting and outputting color documents the way you want them. If you need to improve the results, repeat the steps above until the get the results you want.

By default, image settings you select using the TWAIN datasource are applied to both sides of a two-sided document. For more advanced or complex needs, you may need to have different configurations for each side of the document. By clicking the Different settings per side checkbox, the Front and Back selections in the Side drop-down box on the Image Settings window are available.

A-61560 June 2006

65

Page 69
Image 69
Kodak i1200 manual Using different settings for each side of a document Example