Cleaning or replacing the Degradation of feeder performance, multiple feeds, stoppages, etc.

feed moduleindicate a need to change the feed module. Certain paper types such as carbonless paper or newsprint, or failure to clean regularly, and/or use of non-recommended cleaning solvents (do not clean with alcohol) can shorten the feed module life.

For additional feed modules, see the section entitled, “Supplies and consumables” later in this chapter.

NOTE: The paper present sensor is located to the right of the feed module. Be careful not to damage the paper present sensor when removing or cleaning around the feed module.

1.Push against the raised edge of the feed module cover and lift it up and out of position.

A-61560 June 2006

95

Page 99
Image 99
Kodak i1200 manual