The Device Settings window
General tab
The Device button is located on the Image Settings window. When you select Device, the General and Multifeed tabs are displayed. From the Device Settings window, you can also access Diagnostics.
The General tab allows you to set
Paper Source — select the desired paper source.
•Automatic: looks for paper in the document feeder first. If there are no documents in the input tray, the scanner will look for a document on the flatbed.
•Document Feeder: when you are scanning documents from the input tray.
•Flatbed: when you are scanning documents using the flatbed.
Power Saver — allows you to set the amount of time the scanner will remain inactive before the scanner goes into an idle state. You can turn the Power Saver option off or set a time up to 60 minutes. The default is 15 minutes.
Document Feeder
•Timeout: if you enable this option, you can set the amount of time the scanner will wait (1 to 300 seconds) after the last document enters the transport before the scanner initiates the action you selected when the timeout occurs.
Diagnostics — provides access to the Diagnostics tab.
| 67 |
