Connecting the USB | IMPORTANT: If you have not installed the Kodak Driver Software, |
cable | do that now before proceeding. |
| The USB cable supplied with your scanner has two different ends. |
A
B
1.Attach the B end of the USB cable to the scanner USB port, located on the back of the scanner.
2.Attach the A end of the USB cable to the proper USB port on your PC.
Attaching the output tray • Slide the output tray underneath the scanner platform along the center guide.
NOTE: The output tray can be placed in a variety of positions to meet your scanning needs. See the section entitled, “Adjusting the output tray” in Chapter 3 for more information.
12 |
