Trigger pads, Encoder and slider-related settings

Operation–Play mode

If you hold down the [EXIT] key while operating a controller, the sub- display indication will not switch to the name of the assigned setting; the controller value will continue to be displayed. This lets you edit a setting accurately while watching its actual value.

You can change the backlight color of the sub-displays. (☞p.46 “Setting mode–[16] GLOBAL (Global setting)”)

Encoder and slider-related settings

•You can assign a MIDI message to an encoder. For details, see “Setting mode–[1] ENCODER (Encoder assignment)” (☞p.20).

•You can assign a MIDI message to a slider. For details, see “Setting mode– [2] SLIDER (Slider assignment)” (☞p.24).

•You can specify the USB-MIDI port from which the assigned MIDI message is transmitted. For details, see “Setting mode–[15]USB-MIDI PORT (USB-MIDI Port setting)” (☞p.44).

2. Trigger pads

When you press a pad, it will transmit the assigned note data or control change.

Pads to which note data is assigned will also transmit velocity. (“Setting mode–[3] PAD 1–8 (PAD 1–8 assignment)” (☞p.24) or “Setting mode–[4] PAD 9–16 (PAD 9–16 assignment)” (☞p.26))

Pads to which a control change is assigned will transmit a value of either 0 or 127.

Display

If note data is assigned

When you press a pad, the main display will show the transmitted note number and velocity value.

HEX LOCK key Off (decimal display) HEX LOCK key On (hexadecimal display)

Note number Velocity

If note data is assigned, the pad will light red once when the message is transmitted.

If a control change is assigned

When you press a pad, the main display will show the contents of the transmitted control change message.

HEX LOCK key Off (decimal display) HEX LOCK key On (hexadecimal display)

MIDI message Value

If a control change is assigned, the pad will light green. If the pad operation is set to Momentary, it will light orange when you press the pad to transmit a value if 127. (It will once again light green when a value of 0 is transmitted.) If the pad operation is set to Toggle, the pad will alternate between green and orange each time you press it.

You can change the lit status of the pads. (☞p.46 “Setting mode–[16] GLOBAL (Global setting)”)

Trigger pad-related settings

•You can assign a MIDI message to a trigger pad. For details, see “Setting mode–[3] PAD 1–8 (PAD 1–8 assignment)” (☞p.24) or “Setting mode–[4] PAD 9–16 (PAD 9–16 assignment)” (☞p.26).