Korg KONTROL49 owner manual NoAssign, CtrlChg# Control Change, Momt Momentary, Tgle Toggle

4	Use the main encoder to select the type of MIDI message.
	NoAssign
	No MIDI message will be assigned to the selected pad. If you select
	NoAssign, the setting will be updated when you press the [ENTER]
	key (blinking). (☞Step 14)
	Note# (Note message)
	Assigns a note message to the selected pad.
	CtrlChg# (Control Change)
	A control change message will be assigned to the switch. If you
	selected CtrlChg#, select the control change number. (☞p.30
	“Assigning a control change”)
5	Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “Note
	Select” (specify a note number) or “Control Change Select” (specify a

control change number).

When assigning a note message (Green) (Green)

	When assigning a control change
6	Use the main encoder or the pads to select a note number or control
	change number. The range is 0–127. (☞p.4 “About the trigger pad
	functions–Input numerical values,” ☞p.56 “Available MIDI messages”)
	If you’re assigning a note message, press a note on the keyboard to
	assign that note number to the current pad.
7	Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
	Channel” (specify the MIDI channel).

(Green) (Green)

	Operation–Setting mode
8	Use the main encoder or the pads to select the MIDI transmit channel.
	The range is 1–16 (ch). (☞p.4 “About the trigger pad functions–Input
	numerical values”)
9	Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “PAD
	Type” (select the type of pad operation).

(Green) (Green)

10 Use the main encoder to specify the type of operation that occurs when you press the pad.

Momt (Momentary)

If a control change is assigned to the pad, pressing the pad will transmit the assigned control change message with a value of 127, and releasing it will transmit a value of 0.

If a note message is assigned to the pad, pressing the pad will transmit a note-on, and releasing it will transmit a note-off.

Tgle (Toggle)

If a control change is assigned to the pad, the assigned MIDI message will be transmitted alternately with a value of 127 and a value of 0 each time you press the pad.

If a note message is assigned to the pad, a note-on message and a note- off message will be transmitted alternately each time you press the pad.

11 Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “Velocity Type” (select the type of velocity).

12 Use the main encoder to select the velocity type.

VelSens (Velocity Sens)

The transmitted velocity value will depend on how strongly you strike the pad. (If you choose VelSens, press the [ENTER] key (blinking) to save the setting.)

Setting mode

25