Korg KONTROL49 1, 2, 3, 4, 1

Operation–Setting mode

36

5Press the [ENTER] key.

The setting will be updated, and you will return to Play mode.

If you want to keep the changes you’ve made, save them in Scene mode.

If you turn off the power or select a different scene without saving, your

changes will be discarded. For details, see “Scene mode–[16] WRITE”

(☞p.55).

■

Assigning a control change

If you chose CtrlChg# for “Message Select,” you’ll need to use “Control

Change Select” to select the control change, and then proceed to “MIDI

Channel” (select the MIDI channel).

1Press the OCTAVE SHIFT/CURSOR [®] key to move to “Control

Change Select” (select the control change number).

2Use the main encoder or pads to select the desired control change

number in a range of 0–127.

3Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI

Channel” (specify the MIDI channel).

4Use the main encoder or the pads to select the MIDI transmit channel.

The range is 1–16 (ch).

5Press the [ENTER] key.

The setting will be updated, and you will return to Play mode.

If you want to keep the changes you’ve made, save them in Scene mode.

If you turn off the power or select a different scene without saving, your

changes will be discarded. For details, see “Scene mode–[16] WRITE”

(☞p.55).

[11] FOOT SW (Foot SW assignment)

Here you can assign a MIDI message to a foot switch or damper pedal

connected to the rear panel SWITCH jack, and specify the MIDI

transmission channel.

You can assign damper, sostenuto, soft pedal, portamento, or control change

(CC#) messages to the foot switch.

1Hold down the [SETTING] key and press pad [11].

Now you can make pedal assignments, and the [SETTING] key and

pad [11] will light. The main display indicates “Message Select” (select

the MIDI message).

2Use the main encoder to select the MIDI message you want to assign.

NoAssign

No MIDI message will be assigned to the foot switch. If you choose

NoAssign, press the [ENTER] key (blinking) to apply the setting.

(☞Step 5)

Damper

Damper (CC#64) messages will be assigned to the foot switch.

Pressing the foot switch transmits a value of 127, and releasing it

transmits a value of 0.

In Play mode, the main display will indicate “Dampr--” when you

operate the foot switch.

(Green)(Red)

(Green)(Green)

Contents

Main ii Precautions iii About your data About the software license agreement Conventions in this manual iv Table of Contents Operation ..........................................................8 Introduction........................................................1 v Scene mode...............................................................52 Message mode ..........................................................49 Contents of the package The KONTROL49 (main unit) AC adaptor Owners manual, MIDI Implementation chart Installation Guide Software license agreement Introduction Main features Parts and what they do Front panel Vector joystick Switch 1, Switch 2 Bend/Mod Wheels Page Input numerical values About the pad numbers Select the different KONTROL49 modes Transmit MIDI messages Rear panel do Parts and what the [Contrast adjustment] knob SWITCH jack Making connections and turning the power on MIDI & AC adapter connection 1 2 3 2 3 OperationAbout the KONTROL49s modes Operation About the KONTROL49s modes 1. Play mode 2. Setting mode 3. Message mode Quick Start Quick Start 1. 2. 3. 6 75 11 9 6, 8 4. Quick Start 12 5. 13 Play mode Using the controllers 1. Encoders and sliders These controllers transmit the assigned message each time you operate them. 14 Encoder and slider-related settings 2. Trigger pads Trigger pad-related settings 15 3. Vector joystick mode X Vector joystick-related settings 16 Pitch Bend & Mod Wheel controller settings 5. Switches 1 and 2 Switches 1 and 2 settings 6. Pedal (PEDAL jack/SWITCH jack) 17 Pedal-related settings mode 7. Main encoder Main encoder settings 1 2 Keyboard-related settings Setting mode Scene parameter settings Global parameter settings About the OCTAVE SHIFT/CURSOR keys, [ENTER] key, and [EXIT] key [1] ENCODER (Encoder assignment) 1 2 3 4 21 5 6 4 7 8 5 6 7 8 9 1 2 [2] SLIDER (Slider assignment) 1 [3] PAD 18 (PAD 18 assignment) 2 3 4 ) Use the 6 5 13 14 [4] PAD 916 (PAD 916 assignment) 1 [5] Pitch Bend (Pitch Bend assignment) 3 4 5 6 7 1 2 3 4 5 8 Assigning aftertouch mode 1 2 1 2 3 4 [6] MOD (MOD Wheel assignment) 1 3 4 [7] VECTOR-X (Vector-X assignment) 1 3 4 32 5 6 [8] VECTOR-Y (Vector-Y assignment) 1 [9] SW1/SW2 (SW1/SW2 assignment) 5 6 7 8 Using the switches in two-parameter mode 4 5 6 7 8 1 3 4 36 Assigning a control change 1 2 3 4 [11] FOOT SW (Foot SW assignment) 1 37 3 4 Assigning a control change 1 2 3 4 5 6 7 [12] KEYBOARD (Keyboard setting) 1 5 6 7 8 40 1 3 4 Assigning Program Change and Bank Select 1 2 3 4 [14] MESSAGE (Message setting) 1 2 3 4 Page 43 BankSel (Bank Select message) 1 2 3 4 5 1 2 3 4 5 6 [15] USB-MIDI PORT (USB-MIDI Port setting) 3 4 5 6 About the KONTROL49 and the driver ports 1 2 47 Pedal Polarity setting 1 2 Pedal Calibration setting 1 2 3 4 48 1 2 3 4 5 1 2 Message mode [1] PANIC (Panic message) e mode Messa 1 2 [3] NOTE OFF (All Note Off message) 1 [4] GM ON (GM On message) 1 1 e mode Messa [7] CONTINUE (Continue message) 1 [8] TAP (Tap tempo message) 1 [9][16] USER MESG 18 (User message) Scene mode About the OCTAVE SHIFT/CURSOR keys, [ENTER] key, and [EXIT] key [1][12] Select Scene 1 [13] MIDI Channel 1 Scene mode 2 3 4 1 2 [15] PRELOAD 1 2 3 4 5 Page AppendicesAvailable MIDI messages Appendices Available MIDI messages System Realtime messages The KONTROL49 lets you transmit the following MIDI messages. Channel messages Channel Mode messages RPN MSB/LSB Note no. AppendicesPreset Scene Name Preset Scene Name MIDI implementation KONTROL49 format System exclusive messages Switching scenes Troubleshooting Power does not turn on Cant install the driver Your software does not respond to the KONTROL49 AppendicesTroubleshooting AppendicesMain specifications Main specications Controllers Display Memory Connectors Index 63 M N O P 64 R S T U Page Owners manual IMPORTANT NOTICE TO CONSUMERS