Korg KONTROL49 5, 6, 7, 1, 2, 3, 4

Operation–Setting mode

38

5Press the OCTAVE SHIFT/CURSOR [®] key to move to “Pedal Type”

(select the type of pedal operation).

6Use the main encoder to select the type of pedal operation.

Momt (Momentary)

The assigned MIDI message will be transmitted with a value of 127

when you press the pedal, and with a value of 0 when you release the

pedal.

Tgle (Toggle)

The assigned MIDI message will alternately be transmitted with a

value of 127 and a value of 0 each time you press the pedal.

7Press the [ENTER] key.

The setting will be updated, and you will return to Play mode.

If you want to keep the changes you’ve made, save them in Scene mode.

If you turn off the power or select a different scene without saving, your

changes will be discarded. For details, see “Scene mode–[16] WRITE”

(☞p.55).

[12] KEYBOARD (Keyboard setting)

Here you can specify the MIDI channel, transposition, and velocity curve for

the note messages that are transmitted when you play the keyboard. The

velocity value of the note message transmitted when you strike a key can be

adjusted by a velocity curve, or can be a ﬁxed value. You can choose one of

eight velocity curves or a ﬁxed velocity value.

1Hold down the [SETTING] key and press pad [12].

Now you can make Keyboard settings, and the [SETTING] key and

pad [12] will light. The main sensitivity indicates “MIDI Channel”

(MIDI channel setting).

2Use the main encoder or the pads to select the MIDI channel on which

the MIDI message will be transmitted. The range is 1–16 (ch). (☞p.4

“About the trigger pad functions–Input numerical values”)

3Press the OCTAVE SHIFT/CURSOR [®] key to move to “Transpose”

(transpose setting).

The transpose setting lets you shift the pitch of the keyboard in

semitone steps.

4Use the main encoder or the pads to set the keyboard transpose setting.

The range is –24 – +24 (±2 octaves). (☞p.4 “About the trigger pad

functions–Input numerical values”)

(Green)(Green)

(Green)(Green)

Contents

Main ii Precautions iii About your data About the software license agreement Conventions in this manual iv Table of Contents Operation ..........................................................8 Introduction........................................................1 v Scene mode...............................................................52 Message mode ..........................................................49 Contents of the package The KONTROL49 (main unit) AC adaptor Owners manual, MIDI Implementation chart Installation Guide Software license agreement Introduction Main features Parts and what they do Front panel Vector joystick Switch 1, Switch 2 Bend/Mod Wheels Page Input numerical values About the pad numbers Select the different KONTROL49 modes Transmit MIDI messages Rear panel do Parts and what the [Contrast adjustment] knob SWITCH jack Making connections and turning the power on MIDI & AC adapter connection 1 2 3 2 3 OperationAbout the KONTROL49s modes Operation About the KONTROL49s modes 1. Play mode 2. Setting mode 3. Message mode Quick Start Quick Start 1. 2. 3. 6 75 11 9 6, 8 4. Quick Start 12 5. 13 Play mode Using the controllers 1. Encoders and sliders These controllers transmit the assigned message each time you operate them. 14 Encoder and slider-related settings 2. Trigger pads Trigger pad-related settings 15 3. Vector joystick mode X Vector joystick-related settings 16 Pitch Bend & Mod Wheel controller settings 5. Switches 1 and 2 Switches 1 and 2 settings 6. Pedal (PEDAL jack/SWITCH jack) 17 Pedal-related settings mode 7. Main encoder Main encoder settings 1 2 Keyboard-related settings Setting mode Scene parameter settings Global parameter settings About the OCTAVE SHIFT/CURSOR keys, [ENTER] key, and [EXIT] key [1] ENCODER (Encoder assignment) 1 2 3 4 21 5 6 4 7 8 5 6 7 8 9 1 2 [2] SLIDER (Slider assignment) 1 [3] PAD 18 (PAD 18 assignment) 2 3 4 ) Use the 6 5 13 14 [4] PAD 916 (PAD 916 assignment) 1 [5] Pitch Bend (Pitch Bend assignment) 3 4 5 6 7 1 2 3 4 5 8 Assigning aftertouch mode 1 2 1 2 3 4 [6] MOD (MOD Wheel assignment) 1 3 4 [7] VECTOR-X (Vector-X assignment) 1 3 4 32 5 6 [8] VECTOR-Y (Vector-Y assignment) 1 [9] SW1/SW2 (SW1/SW2 assignment) 5 6 7 8 Using the switches in two-parameter mode 4 5 6 7 8 1 3 4 36 Assigning a control change 1 2 3 4 [11] FOOT SW (Foot SW assignment) 1 37 3 4 Assigning a control change 1 2 3 4 5 6 7 [12] KEYBOARD (Keyboard setting) 1 5 6 7 8 40 1 3 4 Assigning Program Change and Bank Select 1 2 3 4 [14] MESSAGE (Message setting) 1 2 3 4 Page 43 BankSel (Bank Select message) 1 2 3 4 5 1 2 3 4 5 6 [15] USB-MIDI PORT (USB-MIDI Port setting) 3 4 5 6 About the KONTROL49 and the driver ports 1 2 47 Pedal Polarity setting 1 2 Pedal Calibration setting 1 2 3 4 48 1 2 3 4 5 1 2 Message mode [1] PANIC (Panic message) e mode Messa 1 2 [3] NOTE OFF (All Note Off message) 1 [4] GM ON (GM On message) 1 1 e mode Messa [7] CONTINUE (Continue message) 1 [8] TAP (Tap tempo message) 1 [9][16] USER MESG 18 (User message) Scene mode About the OCTAVE SHIFT/CURSOR keys, [ENTER] key, and [EXIT] key [1][12] Select Scene 1 [13] MIDI Channel 1 Scene mode 2 3 4 1 2 [15] PRELOAD 1 2 3 4 5 Page AppendicesAvailable MIDI messages Appendices Available MIDI messages System Realtime messages The KONTROL49 lets you transmit the following MIDI messages. Channel messages Channel Mode messages RPN MSB/LSB Note no. AppendicesPreset Scene Name Preset Scene Name MIDI implementation KONTROL49 format System exclusive messages Switching scenes Troubleshooting Power does not turn on Cant install the driver Your software does not respond to the KONTROL49 AppendicesTroubleshooting AppendicesMain specifications Main specications Controllers Display Memory Connectors Index 63 M N O P 64 R S T U Page Owners manual IMPORTANT NOTICE TO CONSUMERS