Pitch Bend & Mod Wheel controller settings
•Assign a MIDI message to the Pitch Bend controller. For details, see “Setting
•Assign a MIDI message to the Mod Wheel controller. For details, see “Setting
•Specify the
5. Switches 1 and 2
The assigned MIDI message will be transmitted each time you press switch 1 or switch 2. For switches 1 and 2 you can use either a
Display
When you operate switch 1 or 2, the contents of the message will appear in the main display.
Depending on the assigned MIDI message, you can turn the [HEX LOCK] key on (lit red) to see the contents of the MIDI message in hexadecimal.
If program change is assigned | If program change is assigned |
(decimal display) | (hexadecimal display) |
MIDI message Value | MIDI message Value |
If a MIDI message has not been assigned (NoAssign), pressing switches 1/2 will not change the indication in the main display (it will continue to show the scene name).
If you’re using the
If you’re using the
Switches 1 and 2 settings
•Assign a MIDI message to switches 1/2. For details, see “Setting
•Specify the
6. Pedal (PEDAL jack/SWITCH jack)
The assigned MIDI message will be transmitted when you operate a foot controller or damper pedal connected to the PEDAL jack or SWITCH jack. Operating the pedal will transmit a value in the range of
Display
When you operate a connected pedal, the main display will show the contents of the message.
If control change is assigned | If damper is assigned |
MIDI message Value | MIDI message Value |
16
