Korg KONTROL49 owner manual ProgChg Program Change message

(Green) (Green)

2 Press the OCTAVE SHIFT/CURSOR [®] key to move to “Data” (specify the value of the transmitted message).

(Red) (Green)

Operation–Setting mode

■ CtrlChg (Control Change message)

1 Use the main encoder or the pads to select the control change you want to transmit. The range is 0–127.(☞p.4 “About the trigger pad functions–Inputnumerical values”)

If you decide to cancel, press the [EXIT] key to return to Play mode.

If you want to keep the changes you’ve made, save them in Scene mode. If you turn off the power or select a different scene without saving, your changes will be discarded. For details, see “Scene mode–[16] WRITE” (☞p.55).

■ ProgChg (Program Change message)

1	Use the main encoder or the pads to input the program number you
The selected parameter or the edited value will blink in the display.	want to transmit. The range is 1–128. (☞p.4 “About the trigger pad

functions–Input numerical values”)

		You can also press the [HEX LOCK] key and input the value in
		hexadecimal form.
	2	Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
		Channel” (specify the MIDI channel).
3	Use the main encoder or the pads to specify the value of the message	(Red) (Green)
	that will be transmitted. The range is 0–127.
4	Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
	Channel” (specify the MIDI channel).

	3	Use the main encoder or the pads to select the MIDI channel on which
		the program change message will be transmitted. The range is 1–16
	4	(ch). (☞p.4 “About the trigger pad functions–Input numerical values”)
5		Press the [ENTER] key to apply the settings.
	Use the main encoder or the pads to select the MIDI channel on which	If you decide to cancel, press the [EXIT] key to return to Play mode.
	the control change message will be transmitted. The range is 1–16 (ch).
6	Press the [ENTER] key to apply the settings.

42