If you are using the Editor Librarian software, the KONTROL49 will move to the Dump page automatically.
[15] PRELOAD
Here you can
You can load any of the twelve preset scenes into any scene number.
1 | Hold down the [SCENE] key and press pad [15]. |
| You will enter the Preload page, and the [SCENE] key will light. |
The main display will indicate “Source” (select the preset that you want to load), and that pad will blink.
| The selectable parameter or value will blink in the main display. |
2 | Use the main encoder or the pads to select the preset scene that you |
| want to load. If you use the pads, simply press the pad for the scene |
| you want to load. |
3 | Press the OCTAVE SHIFT/CURSOR [®] key to proceed to |
| “Destination” (select the loading destination). |
(Red) (Green)
4 | Use the main encoder or the pads to select the destination into which |
| you want to load the preset scene. |
5 | Press the OCTAVE SHIFT/CURSOR [®] key. |
| The main display will ask “Sure ?” (“Are you sure you want to load?”). |
6 | Press the [ENTER] key to load the preset scene. |
| When loading is completed, the main display will indicate “Complete” |
and you will return to Play mode.
If you press the [EXIT] key, the scene name will be displayed.
If you decide to cancel, press the [EXIT] key to return to Play mode.
Never turn off the power while loading data; doing so may cause the internal data to be damaged.
54
