Korg KONTROL49 owner manual Start Start message, Continue Continue message, TAP Tap tempo message

[6] START (Start message)

This transmits the realtime message Start [FA].

1	Hold down the [MESSAGE] key and press pad [6].
	Pad [6] will briefly go dark, and the realtime message Start will be

transmitted. The main display will indicate “START.”

Release the [MESSAGE] key to return to Play mode.

[7] CONTINUE (Continue message)

This transmits the realtime message Continue [FB].

1	Hold down the [MESSAGE] key and press pad [7].
	Pad [7] will briefly go dark, and the realtime message Continue will be

transmitted. The main display will indicate “CONTINUE.”

Release the [MESSAGE] key to return to Play mode.

Operation–Message mode

[8] TAP (Tap tempo message)

You can set the tempo of a sequencer etc. by pressing pad [8] at regular intervals.

1	Hold down the [MESSAGE] key and press pad [8] two or more times at
	the desired tempo.

Pad [8] will briefly go dark, and the main display will indicate the tempo (to the first decimal place) of the timing clock messages the KONTROL49 is transmitting.

Release the [MESSAGE] key to return to Play mode.

If you hold down the [EXIT] key and press the [MESSAGE] key to select the Mode Lock state, you can set the tempo simply by pressing pad [8] without having to hold down the [MESSAGE] key.

[9]–[16] USER MESG 1–8 (User message)

Here’s how to transmit the messages you created in the Setting mode [14] MESSAGE page.

1	Hold down the [MESSAGE] key and press a pad [9]–[16].
	The pad you pressed will briefly light orange, and the message you

assigned will be transmitted. The main display will show “MESSAGE number,” where the number is 1–8, corresponding to pads [9]–[16].

Release the [MESSAGE] key to return to Play mode.

Message mode

51