
4.1. Toner Kit Replacement
Supplying Toner
☛KBefore proceeding, take note of the following:
Do not leave floppy disks etc. lying around while performing this mainte- nance procedure. This procedure tends to raise a little toner dust which can harm magnetic recording media.
KDo not attempt to reuse the waste toner remaining in the toner container.
Use only the toner kit exclusively designed for the printer. Use of a toner kit intended for use with other printer models may damage the printer and void the warranty.
To replace the toner container, proceed as follows.
1.Open the printer’s top cover all the way.
2. Press the toner container release lever (Green ) to release the old toner container from the printer. Remove the old toner container as gently as possible.
☛Keep the toner container as level as possible while removing.
3. Put the old toner container in the plastic
Top Cover
Old Toner
Container
Toner Container Release Lever (Green )
bag supplied with the toner kit. Dispose of the toner container.
Plastic Bag
☛The old toner container may be in- cinerated without the risk of gener- ating harmful gas.
4.Take the new toner container from its bag.
With the label side down, thoroughly shake the toner container (in the direc- tion of the arrow) ten times or more to loosen and mix the toner inside.
Old Toner Container
New Toner Container