Kyocera FS-3700 manual Feed Selec ion, On-line/Off-line Setting, Abandoning a Printing Job

Cassette 2.2. Operating Procedures

Feed Selec ion

The FEED key lec s he paper feed cassette [Cassette] or multi -purpose tray [MPtray] (or the option paper feeder[s], if installed) as the paper ource. The FEED key can be used whenever the message display indicat s Readyor Addpaper.

Press the FEED key. The selection cycles and is moment rily displayed in the messMPgetraydisplay as:

The current selection is indicated by a green light on the printer symbol above the key.

On-line/Off-line Setting

By pressing the ON LINE key you can change the print r between the on-line state, in which it prints the data it receives from the computer, and the off-line state, in which it stores the data for printing later.

1.Make sure that the message display indicates Ready.

2.Press the ON LINE key.

If the printer is on-line, it changes to off-line. If the printer is off-line, it changes back to on

-line.

WaitingThe ON LINE indicator lights when the printer is on-line. Processing

Going off-line may or may not halt communication between the p inter and computer, de- pending on details of the current interface. While off-line, the printer ontinues to accept any data hat arrives until the current interface buffer is full, at which point it tructs the com-

puter o stop sending data. Data stored while off-line are printed when the pri ter is returned to the on-line state.

Abandoning a Printing Job

You can abandon a printing job before it is completed. If the printer is simulta eously receiv- da on more than one interface, you can selectively cancel the printing job on a particular

interface.

This procedure can be used while the message display indicatesor

.

2-7