Installing the UBox Hardware | Lantronix 4100, 2100 instruction

3: Installing the UBox

The UBox package has two components: the UBox hardware and the UBox software. Both have their own settings and configuration options.

This chapter includes the following topics:

Installing the UBox Hardware

Installing the UBox Software

Uninstalling the UBox Device Server Software

Installing the UBox Hardware

Warning: Do not connect a USB device to the UBox until you have

finished installing the software and hardware. Chapter 4: Using USB Devices on the Network walks you through the process of using your USB devices.

Step 1- Connect the UBox to Your Network

2. Connect an Ethernet cable to the Ethernet port of the UBox.

2.Connect the other end of the cable to your network.

If you do not have a network, you can connect the UBox directly to the Ethernet port on your computer using an Ethernet crossover cable.

Step 2 - Connect the UBox’s Power Supply and Read the LEDs

1.Connect the power supply (included in the box) to the UBox’s power connector.

Figure 3-1. Ethernet and Power Connections

UBox 2100

UBox

		Network
	Power Supply	Connection
Network
Connection	Power Supply
	Power Supply

UBox User Guide		11

Image 11

Lantronix 4100, 2100 manual Installing the UBox Hardware, Connect the UBox to Your Network

Contents

Part Number Revision D June UBox USB Device Server User Guide Lantronix Corporate Headquarters TrademarkCopyright Contacts Revisions Contents Contents Changing the UBoxs Settings CE Mark Declaration of Conformity Resetting the UBox HardwareTroubleshooting USB Devices Technical Support Disconnect Printer for Auto Connect Remaining chapters in this guide include Using This GuidePurpose and Audience Summary of Chapters USB Speeds and Throughput IntroductionModel and Part Numbers Connectivity to a Network Supported DevicesCompatible USB Devices Connectivity to USB Devices Windows Windows XP and Vista 32 bit Hub SupportRequirements Whats Inside the Package Connect the UBox to Your Network Installing the UBoxInstalling the UBox Hardware Connect the UBox’s Power Supply and Read the LEDs UDS4100 System LEDs Installing the UBox To install the UBox Software Installing the UBox Software USB Devices Tab Servers Tab Displaying a UBox Uninstalling the Lantronix UBox Software Connect a USB Device to the UBox Using USB Devices on the NetworkConnecting Your USB Device Overview Action Using USB Devices on the NetworkReview the following information on the USB Devices tab Location Connect a Networked USB DeviceDevice Name Status Disconnect Your USB Devices Multiple UBoxes and USB Devices Using Multiple UBoxes and USB DevicesCompound Devices One UBox with Multiple Users Summary Other Ways to Connect and Disconnect USB DevicesUBox Groups on Multiple UDP Ports PC Connectivity to UBoxes and UBS Devices Using the UBox System Tray To use the auto connect feature Auto Connecting Printers Disconnect Printer for Auto Connect Auto Connect Enabled From the Advanced menu, select Force Device Disconnect Using Forced Device DisconnectTo use Forced Device Disconnect On the USB Devices tab, select the UBox to disconnect Forced Device Disconnect on the Advanced Menu Using Multi-and Single-User Connect Modes Device Status To separate compound devices Separating Compound DevicesTypes of USB Devices Separating Compound Devices Viewing UBox Settings Changing the UBoxs Settings Server Name Changing the UBoxs SettingsStatus column, the following may display Server # To edit the UBox’s Settings on the Access Tab Editing Server Settings Access Tab Connect Mode Firmware UpgradeUpdate the following settings as desired Editing Server Settings Network Tab IP Address, Subnet Mask, and Gateway for the UBox IP AddressAssignment TCP Port Subnet MaskGateway UDP Port Editing Server Settings USB Device Configuration Tab Cfg Location/SerialNumber Following information displays at the top Connection Applying, Canceling, or Removing Server SettingsReenter Password Share Mode Updating the UBoxs Firmware Restoring Default SettingsTo restore the UBox to factory settings To update the firmware Click the Close button UBox User Guide Update Server Firmware Enter the following information Overriding Server Network SettingsTo override network settings You can get more information about ZeroConf at Refreshing Data To update your computer’s settings Changing Local Software SettingsUpdating Personal Communication Settings Multicast Address Changing Local Software SettingsClient Name Update the following information as needed Updating Server Access Settings Device Serial # Viewing or Removing Device PasswordsTo view or remove USB device passwords Switching Between Sets of UBoxes ‹ Off TroubleshootingTroubleshooting Status Lights Before You Begin Status Lights on UBox Troubleshooting System Status Lights 2 Boot-UpSystem Status Light Status 2 is Off System 2 isOn / System Off / System Troubleshooting UDP Ports Is Not Listed Troubleshooting Network IssuesCommunication Between your PC and the UBox To ping the UBox Final Step Resetting the UBox HardwarePower-Cycling or Using the Reset Button Firewalls To boot into safe mode Rebooting the UBox into Safe Mode Using the Reset Button Technical Support Troubleshooting USB DevicesTo troubleshoot problems with USB Devices To troubleshoot issues with multiple users of a USB device Troubleshooting Position of Status Lights on the UBox Status Light Behavior System 2 red/amber blink Status Light BehaviorIf System 1 green Refer to -4. UBox Status Lights -- UBox is Running System 2 and System 3 both System 2=OFF and System 3= on System 2= OFF and System 3= OFFSystem 2= on and System 3= OFF System 2= on and System 3= on To determine Windows XP version Configuring the Windows XP Firewall To obtain your IP address AConfiguring the Windows XP FirewallTo obtain your UDP and TCP port numbers Local Area Connection Properties Advanced Tab To obtain the Advanced Settings window To add your UDP Port to the firewall Advanced Settings Window To close the remaining windows To add your TCP port to the firewall Select On Click the Exceptions tab UBox User Guide To access your firewall software 11. Exceptions Tab 13. Add a Port Window TCP Select UDP Click OK Manufacturers Name and Address Compliance UBoxCE Mark Declaration of Conformity Canada Digital Apparatus EMI Standard Translation Australia/New ZealandDisclaimer and Supplementary Information BCompliance UBox SLB SLP SCS SLS DSC RoHS Notice Declaration of Conformity CCompliance UBox Manufacturer’s Contact Lantronix Software License Agreement DLantronix Software License Agreement Lantronix Warranty